Where is the clutch release bearing installed? - TAIZHOU HONGHUI MACHINERY CO.,LTD

Exhibitions

Industry Information

P.C.: 317600
E-mail: info@chinarhr.net
Tel: +86-576-87138327 / 89906183
Fax: +86-576-87138307 / 89906181

News Content

Where is the clutch release bearing installed?

The release bearing is installed on the wave fork of the gearbox, which can be seen when the gearbox is lifted down. Installation method of release bearing:
1. When removing the gearbox, the rocker arm on the clutch release fork shaft shall be removed, and the pressing plate of the release bearing can be clamped with the rocker arm during installation;
2. The clutch release bearing is installed between the clutch and the transmission, and the loose sleeve in the release housing is in the tubular extension of the first shaft bearing cover of the transmission;
3. The shoulder release bearing is always against the release fork through the return spring, and returns to the final position. The release lever end (release finger) keeps the clearance at about 3~4mm.

JEAMSON:237929572

KAVI:1529336089

	0576-87138327

Mobile Access

    About Us
    News
    Products
    Device Center
    Job
    Feedback
    Contact Us

FAX:0576-87138307 89906183
ADD:li'Ao Industrial Zone, KanMen Sub-district, Yuhuan, Zhejiang, CHINA 317600

TEL:0576-87138327 89906183 FAX:0576-87138307 89906181

Technical Support:censt